3000/SSR Electronic Sounder

The 3000/SSR high output electronic sounder designed by Protec in house developers, utilises a Piezo driver unit to enable high sound output and very low current consumption. With two base options and improved aesthetic appearance the 3000/SSR simplifies the installation of the device.

Available in either Red or White body colours, and an optional deep base to allow surface mounted cable to be terminated directly into the sounder, the 3000/SSR has an IP65 rating making the product suitable for mounting internally or externally.

3000/LED High Intensity Flashing Beacon

The unique Protec 3000/LED utilises a high intensity flashing beacon array. This arrangement simplifies installation and considerably improves the aesthetic appearance compared to the more costly and cumbersome alternatives. The 3000/LED is the latest addition to the range of audio/visual devices offered by Protec.

The 3000/LED is available in a choice of lens and backbox colours and has an IP65 rating making the product suitable for mounting internally or externally.

3000/SSR/LED Electronic Sounder Beacon

The 3000/SSR/LED comprises a high output electronic sounder and high intensity flashing beacon array. Combining the two functions in one compact design, improves the aesthetic appearance and simplifies the installation of the device.

Available in a choice of lens and body colours, the 3000/SSR/LED has an IP65 rating making the product suitable for mounting internally or externally. The 3000/SSR/LED/RED is an ideal addition
to any fire alarm system providing a clear audible and visual indication of fire alarm, for users with hearing or visual impairment.

3000/MCP Manual Call Point

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the 3000/MCP indoor call point.
Installation time and ultimately cost, are of paramount importance to any fire or security installer.

The 3000/MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time.

3000/MCP Weatherproof Manual Call Point

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the the 3000/MCP/WP outdoor call point.

The 3000/MCP/WP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be
present, making it a true waterproof and outdoor product.

3000/UG4DP Ventiliation Duct Smoke Detector

The duct smoke detector provides early detection of smoke and products of combustion present in air moving through an HVAC duct. The assembly requires a 3000/OP optical smoke detector head.
The unit has been specially constructed to allow optimum airflow through the smoke detector’s chamber.

A revolutionary ‘one pipe system’, the Venturi Principle, is achieved by the use of a single pipe with two built-in channels which directs the airflow smoothly through the detector’s chamber and returns the air back into the duct. An airflow indicator confirms airflow through the unit itself when the airflow is above 0.75 m/sec.

3000/FIREBEAM40 Optical Beam Smoke Detector

The Protec 3000/FIREBEAM40 Reflective Optical Beam Smoke Detector includes a motorised head unit containing an infra-red transmitter and receiver, a ground level controller and prism reflector. Making use of the prism reflector the returned infrared beam is analysed for smoke contamination and registers a fire condition at a pre determined level.

At ground level the controller unit is used to make operational adjustments. The standard unit covers a range of 5 to 40 metres. To increase the beam range additional reflectors are added.We have 2
kits available; FIREBEAM40/80KIT for a range of 40 to 80 metres, and FIREBEAM80/100KIT for a range of 80 to 100 metres.