3000/OP - Optical Smoke Detector

The low profile conventional optical smoke detector provides efficient reliable detection utilising the light scatter sensing principle with rapid response to a fire signal.
The detector incorporates alarm verification functions, designed to give maximum sensitivity to smoke detection, with high resistance to false alarms due to high air velocity, insects, dust and R.F. interference.

Providing early warning of a fire condition particularly for slow burning fires, the 3000/OP is an ideal general purpose smoke detector for offices, shops, corridors, factories, warehouses & computer rooms.

3000/OPHT Optical Smoke and Heat Detector

The low profile conventional optical heat detector provides efficient reliable detection utilising the light scatter sensing principle with rapid response to a fire signal, in combination with a fast response thermistor to provide the fastest response to fire, whilst drastically reducing common false alarm problems to which optical only detectors may be susceptible.

The detector incorporates alarm verification functions, designed to give maximum sensitivity to smoke detection, with high resistance to false alarms due to high air velocity, insects, dust and R.F. interference.

3000/ION Ionisation Smoke Sensor

The low profile conventional ionisation smoke detector utilises the dual chamber, single source principle to provide optimum response to smoke.
The chamber design inhibits false alarms by providing strong immunity to high air velocities, contamination and RF interference.
Particularly responsive to clean burning fires, the 3000/ION is suitable for high risk areas, solvent stores, rapid fire growth areas & computer rooms.

3000/TEMP Temperature Heat Detectors

The 3000/TEMP56 fast response heat detector incorporates dual sensing elements which are tuned to provide sensitive rate of rise and 56°C fixed temperature response. Suitable for applications where smoke detection is unsuitable but require a high sensitivity heat detector.

The 3000/TEMP64 multi-purpose heat detector is calibrated to a 64°C fixed temperature limit, to provide a stable response for the majority of applications especially where sudden temperature changes could occur such as laundries and ventilated areas.

The 3000/TEMP84 heat detector is calibrated to an 84°C fixed temperature limit, to provide reliable heat detection in areas of high ambient temperature. Suitable for applications such as boiler rooms and kitchens.

3000/BASE OPTIONS
3000/BASE, 3000/SB, 3000/SBEA, 3000/RB

The Protec 3000 fire sensors are interchangeable with a variety of base options, including relay bases, high efficiency sounder bases and combined sounder beacon bases.