| PID011 |
Base Connection Details for PN Analogue OP & ION Detector Base |
| PID011A |
Base Connection Details for PN Analogue OP & ION Detector Base with Remote Indicator |
| PID011B |
PN Analogue Sensor Base Connections showing single remote indicators for group of sensors |
| PID012 |
Base Connection Diagram for PN Analogue OP & ION Detector Base with Sounder |
| PID013 |
Base Connection Details for AN90 OP & ION Detector c/w Sounder and OPTO Isolated Output |
| PID014 |
Base Connection Details for AN90 OP, ION Detector & OPTO Isolated Output |
| PID015 |
AN90 Smoke Detector Address Selection Switches |
| PID022 |
Connection Details for AN90 Zone Interface PCB |
| PID023 |
Connection Details for AN90 Zone/Alarm Interface PCB |
| PID024 |
Connection Details for AN90 Alarm Interface |
| PID025 |
Connection Details for AN90 Zone/Clean Contact Interface PCB |
| PID026 |
Connection Details for AN90 Clean Contacts Interface PCB |
| PID086 |
PN Analogue Dual Loop Isolator Base |
| PID088 |
Connection Details for Analogue Monitored Clean Contact Input Interface |
| PID089 |
Connection Details for AN Clean Contact Interface |
| PID090 |
Connection Details for AN95 16Way Input Board |
| PID092 |
AN95 Addressable Loop Sounder (2 Wire) |
| PID106 |
Connection Details for AN90 Detector Base with Sounder & Xenon Beacon (4 Wire) |
| PID110 |
Connection Details for AN90 Detector Base with Sounder Xenon Beacon (2 Wire) |
| PID112 |
AN95 Addressable Sounder with Beacon (4 Wire) |
| PID113 |
AN95 Addressable Loop Beacon |
| PID114 |
AN95 Addressable Loop Sounder with Sync Pulser |
| PID116 |
Analogue Pegging Point Interface Wiring Details |
| PID118 |
Analogue Flush Break Glass Unit |
| PID122 |
AN95 Addressable Loop/Beacon Sounder |
| PID134 |
AN95 Addressable Loop Sounder Base (Pulsed/Non-Pulsed) |
| PID155 |
PN Analogue Sounder/Sounder Beacon/Beacon 2 & 4 Wire |
| PID261 |
5000 Series Loop Powered Beam Detector |
