6000/OP Interactive Optical Smoke Sensor

Interactive addressable high performance optical smoke sensor provides efficient reliable detection using the light scatter sensing principle with rapid response to a fire signal.

The intelligent sensor data is evaluated by the Protec Algo-TecTM 6000 interactive programmable algorithms, designed to give maximum sensitivity to smoke detection, with high resistance to false alarms due to high air velocity, insects, dust and R.F. interference.
Providing early warning of a fire condition particularly for slow burning fires, the 6000/OP is an ideal general purpose smoke sensor for offices, shops, corridors, factories, warehouses and computer rooms.

6000/OPHT Interactive Optical Smoke and Heat

Interactive Addressable High Performance Optical Smoke and Heat
Multi-Sensor. The dual technology multi-criteria fire detector uses detection of smoke by scattering of infra-red within the optical chamber coupled with thermal enhancement of the optical sensitivity, as well as providing temperature detection equivalent to grade A2. The smoke and heat channels can be controlled independently for day/night operation with intelligent data being evaluated by the Protec Algo-Tec™ 6000 interactive programmable algorithms.
These sensors react across the range of fire products from large visible particles from smouldering fires to open flaming fires producing very hot smaller particles and are therefore suitable for use in all smoke detection applications. The environmental conditioning algorithms can be selected to filter unwanted alarms and enhance performance.

6000/ION Interactive Ionisation Smoke Sensor

Interactive Addressable Ionisation Smoke Sensor utilises the dual chamber, single source principal to provide optimum response to visible and invisible smoke particles.

The intelligent sensor data is evaluated by the Protec Algo-Tec™ 6000 interactive programmable algorithms. The chamber design inhibits false alarms by providing strong immunity to high air velocities, contamination and R.F. interference.
Particularly responsive to clean burning fires, the 6000/ION is suitable for high risk areas, solvent stores, rapid fire growth areas and computer rooms.

6000/TEMP Interactive Temperature Sensor

Interactive Addressable Temperature sensor with low thermal mass thermistor, giving fast response to temperature increases.

The intelligent sensor data is evaluated by the Protec Algo-Tec™ 6000 interactive programmable algorithms.
Suitable for applications where smoke detection is unsuitable but require a high sensitivity heat detector, boiler rooms, kitchens, laundries and ventilated areas.

6000/HTCO Interactive Heat and CO Sensor

Interactive Addressable High Performance Heat and Carbon Monoxide Multi-Sensor.
A major enhancement to single channel carbon monoxide fire detectors. Generally these have limited fire detection performance in free burning fires. The 6000/HTCO helps overcome this problem with the addition of thermal enhancement to the CO channel, dramatically improving the detection performance, when compared to a single CO channel detector.

6000/OPHTCO Interactive Optical Smoke, Heat & CO

Interactive Addressable High Performance Optical Smoke, Heat and Carbon Monoxide Multi-Sensor.

The ultimate in multi-sensor technology, providing a formidable weapon in the persuit of reliable fire detection and the avoidance of unwanted or false alarms.
The sensor provides total confidence that when initiated, there really is a fire threat.

6000/BASE OPTIONS
6000/BASE, 6000/ASB2, 6000/SB, 6000/ASBEA2, 6000/SBEA, 6000/DIB

The Protec Algo-Tec™ 6000 interactive fire sensors are interchangeable with a variety of base options, including isolator bases, high efficiency sounder bases and combined sounder beacon bases.