Commissioning Request Form

This request form must be fully completed and returned 14 days prior to the commissioning date

Fields marked with a * must be filled in

1.0 - Purchaser of equipment 2.0 - Site address (if unadopted road, enclose details)
*
*
*
*
3.0 - System category 4.0 - Commission Type 5.0 - Sales order information
* - At least one must be selected
M L1 L4
P1 L2 L5
P2 L3 Not Known
* - One must be selected
New
Additional
Alterations
Your order No:
*
Date:
*
Protec Sales No:
*
Additional Equipment: Yes No *
Your order No:
Date:
Protec Sales No:
6.0 - Equipment requiring commissioning
* - First row must be completed
Model No Description QTY
7.0 - Commissioning request

Your order No: *

Commissioning of system will normally be changed at 'engineers' current rate and expenses. Unless a figure has been previously quoted.

If previously quoted please insert cost: £

When quotation is given it is subject to all terms and conditions being adhered to (see terms overleaf) and the information given on this form being accurate. If this is not completed, then at our sole discretion, we reserve the right to charge on a time and expenses basis. Normally we will allow a total allowance of 30 minutes waiting time on site for breach of terms to be rectified before implementing the above.

When is commissioning is required: *

Number of commissioning days required: *

Note - A minimum 14 days notice is required for commission
10.0 - Maintenance requirement 8.0 - Information required

With reference to BS5839-1:2002 section 45 it is essential that the above commissioned fire equipment is subject to periodic maintenance. The fire precaution (workplace) regulations 1997 regulation 6, also refers to maintenance as necessary to the safety of employees in case of fire.

For a free quotation, please contact our customer services on:- (01282) 717171
The system is wired in (cable type) :
yes no
All of the equipment is on site
Our electrician will be on site
Ladders / Scaffolding / Access lifts are available
Has voltage been connected to any equipment
The installation meets BS7671
Cabling has been tested to section 38 (BS5839-1:2002)
Equipment has been connected and securely fixed
11.0 - Details of warranty

Contact Name:
Client:
Address Details:


Contact number:

9.0 - Minimum requirement for system commission to BS:5839
yes no
Cause & effects specification returned with this form
"As fitted drawings" available for engineer
Zone details returned with this form
Text listing available on disk or returned to Protec
system specification available to our engineer
Design certificate
Installation certificate
Should you have any queries please ask our customer service (01282) 717171 or Technical Support (01282) 717444

I accept the terms and conditions detailed HERE, and that the above information provided is accurate
Name: * Contact Number: *
Capacity: * Email: *