• EVC-OSC-Combined-Type-A-B-Fire Telephone
  • EVX-OSC - Combined Fire Telephone / Refuge Point Type C Outstation

EVX-OSC - Combined Fire Telephone / Refuge Point Type C Outstation

Part No. EVX-OSC
  • Compact design
  • Ruggedised handset
  • High volume ringer
  • Status LED
  • 20mm cable gland knock-out
  • Telecoil for hearing-impaired users
  • Full duplex operation
  • Fully Compliant to BS5839-9:2011
  • Magnetic Push Catch
  • Stainless Steel as standard
  • Flush bezel available

Product Details

An EVCS is a fixed, secure, bi-directional, full duplex voice communication system to assist fire fighters during emergencies in high rise buildings or large sites where radio communication cannot be guaranteed to work due to interference from the fire corona.

BS5839-9:2011 covers the design, installation and operation of fire telephones and disabled refuge systems in buildings, and where both systems are fitted to a building, the standard specifies these should form a single system.

The EVX-OSC is a combined Type A and Type B EVCS outstation compatible with the EVX standalone and network systems.

The outstation is supplied in a brushed stainless finish with a Type B refuge panel on the front with a high contrast red screen print with a rugged red telephone handset behind the push door.

A stainless steel bezel is available to allow the outstation to be flushed into a wall reducing the need to stock flush and surface variants.

Suitability
The EVX-OSC is a combined Type A and Type B outstation as defined in BS5839- 9:2011, and can be used as a fire telephone or a disabled refuge call point.

The EVX outstations are designed for use by multi-disability users, having high contrast signage in line with RNIB guidelines and an induction loop coil (to BSEN60118-4) in the handset.

EVX-OSC outstations are mainly used when the disabled refuge area is located within the fire fightinh lift lobby, as described in BS9999 and Building Regulations Approved Document B, these locations should have a low background noise otherwise you may have to consider acoustic hoods.

Mounting The Unit
The outstation should be mounted at a height of 1250mm from to the centre line of the outstation to the floor to comply with the requirements of Building Regulations Document M (Access for the Disabled).

When flush mounting a cut out of 305mm by 155mm is recommended, the bezel slides over the box and is fixed on the wall using a suitable sealant or mastic As the outstation is also to be used as a refuge point, suitable space should be allowed so the system can be used by a parked wheelchair.

Physical

Dimensions (mm)SurfaceBezelCutout
Height300350305
Width150200155
Depth95185
Weight1400g
MaterialStainless Steel
FinishBrushed

 

Outstation Cables

TypeEnhanced Fire Resistant
Cores2 core 1.5mm Screened
Distance500m

 

Standards Compliance

EMCEN55103-1,EN55103-2
LVDEN60950
Product FamilyBS5839-pt9, BS9999, EN60118-4

 

Part Numbers

OutstationEVX-OSC
BezelEVX-OBZ

Technical documents such as Manuals, Software downloads, BIM families, and more are available via our Client / Support Portal. To access, please Sign up or Login to your account.

Contact our sales team today
Product
Acceptance *
Marketing