Duct Probe Smoke Detector Housing
- 6000PLUS/UG4DP for use with Protec Algo-Tec™ 6000 Interactive Digital Addressable Fire Detection Systems
- One-Pipe Air Sampling System
- Patented Venturi Pipe and Duct Housing Test Hole on Cover
- Simple Installation
- Sensitive Flow Indicator
- Filter for Dusty Environments
- Foolproof Installation of Venturi Pipe
The duct smoke detector provides early detection of smoke and products of combustion present in air moving through an HVAC duct. The assembly requires a 6000PLUS/OP digital addressable head.
The unit has been specially constructed to allow optimum airflow through the smoke detector’s chamber.
A revolutionary ‘one pipe system’, the Venturi Principle, is achieved by the use of a single pipe with two built-in channels which directs the airflow smoothly through the detector’s chamber and returns the air back into the duct.
An airflow indicator confirms airflow through the unit itself when the airflow is above 0.75 m/sec.
The ‘one pipe system’ and in-built connection block for termination of cables makes the unit far easier to install than it’s competitors. The duct probe is supplied with full fixing instructions and a mounting template.
The air sampling tube is provided in three standard lengths to suit the HVAC duct.
Duct assembly c/w 600mmsampling tube for 150 mm to 800 mm duct diameter
Duct assembly c/w 1500mm sampling tube for 600mm to1300mm duct diameter
Duct assembly c/w 2800mm sampling tube mfor 1300mm to 2600mm duct diameter
|0.5m/s to 20m/s
|-10°C to +50°C
|95% non condensing
OP = Optical smoke detector.
Note: Detector heads sold separately
|180(W) x 235(H) x 183(D)
Technical documents such as Manuals, Software downloads, BIM families, and more are available via our Client / Support Portal. To access, please Sign up or Login to your account.Sign up or login to your account