logo strap
Sales: 01282 717171 - Service: 0870 907 1710




6000PLUS/OPHTCO/TSVAD

Cart
0
Subtotal exc. VAT.
£0.00
View cart/Login

6000PLUS/OPHTCO/TSVAD
  • Multiple Technology Sensor
  • Combined Smoke, Heat and Carbon Monoxide Sensor
  • Integrated Voice Enhanced Sounder
  • Integrated EN54-23 Visual Alarm Device
  • Seven Selectable Voice Messages
  • Loop Powered & Low Current
  • Programmable Volume Control
  • Integral Short Circuit Isolator
  • Unprecedented False Alarm Rejection
  • VAD Classification Adjustable from 3m to 7.5m Room Coverage Volume
Your Price Exc VAT.:£131.25




The Protec Algo-Tec™ 6000PLUS sensor range has been developed to incorporate advanced fire sensing technology, electronic sounders, high intensity LED visual alarm devices (VAD) and speech enhanced talking sounder capability, all integrated within the sensor head and powered from the loop.

6000PLUS/OPHTCO/TSVAD Interactive addressable high performance optical smoke, heat and carbon monoxide multisensor.

The ultimate in multi-sensor technology, providing a formidable weapon in the pursuit of reliable fire detection and the avoidance of unwanted or false alarms. The sensor provides total confidence that when initiated, there really is a fire threat.
The sensor incorporates infra-red light scattering for smoke detection, with thermal enhancement of the optical sensitivity, temperature detection equivalent to grade A2, and a third channel incorporating a carbon monoxide (CO) sensing element.
The combination of optical smoke, heat and carbon monoxide gas sensing technology within one fire detector head provides the ideal solution. The sensor can now detect free burning chemical fires, fires producing smoke and low levels of CO and heat, to deep seated smouldering fires, which produce little heat and smoke but large amounts of CO.
Combining the results from all sensing channels enables rapid fire detection with rejection of false alarms and increased sensor reliability.

Sensor Talking Sounder - For the ultimate method of alerting building occupants of the incidence of an emergency, the Protec Algo-Tec™ 6000PLUS sensor is equipped with an integrated voice enhanced sounder. The talking sounder is capable of delivering synchronised alert and evacuate messages around a building, removing any ambiguity, particularly for anyone unfamiliar with the building alert and evacuation strategy, enabling a more prompt and safe building evacuation.

Sensor VAD - Compliance with DDA legislation is assisted by the addition of the Protec visual alarm device (VAD) to the 6000PLUSensor, to warn those with hearing impairments or in noisy environments. The VAD utilises a high intensity LED with lower power consumption and increased reliability when compared to alternative indicators.
The VAD is located in the centre of the sensor, so can be viewed from all angles.
Suitable for ceiling mounting the VAD distributes light in a cylindrical pattern to achieve the required minimum illumination of 0.4lux over the entire coverage area in accordance with EN54-23.
The maximum mounting height is 3m with a coverage diameter of 7.5m.
For smaller areas the device can be programmed on-site for coverage diameter of 3m or 5m at reduced power.

Environment

-10°C to +50°C (95% R.H. non condensing)

Ingress Protection

IP21C

Weight (excluding base)

105g

Loop Powered

Yes

Loop Voltage

18 - 28V

Loop Standby Load

0.55mA

Peak Alarm Load

25mA

Mounting Height

3m

Coverage

7.5m, 5m or 3m cylindrical diameter

VAD Flash Rate

1Hz or 0.5Hz white flash

Isolator

Yes

Device Protocol

Algo-Tec™ 6000PLUS

Dimensions (mm)

95ø x 54.5H

Product Approval

CoCP No: 0356-CPR-0407
Dop No: PFD-CPR-0092
Relevant Standard: EN54 Part 3, 5, 7, 17 & 23
AS7240 Part 15 (5&7) & 23
CE Marked

 

Tone Options

Bell Tone: 800Hz
Warble Tone: 990Hz(250ms), 730Hz(250ms)
Continuous Tone: 990Hz
Pulse Tone: 990Hz(500ms), Silence(500ms)
 

Tone Volume Options

The tone and volume are selectable at the control panel (measured at one metre):
High: 85dB(A), Mid: 75dB(A), Low: 65dB(A)
 

BASE Options
 

6000PLUS/BASE
- Low profile common mounting base

6000PLUS/FFBASE
- Fast fixing semi recessed base


Note - base options above are included in the product approval.

15LHK0958-01

 

Typical Wiring using 6000PLUS/BASE

 



Related products