6000 Manual Call Point
- Unique Installation Concept
- Anti-Tamper Facility
- Enhanced Aesthetics
- Fully Approved to the Latest Standards
- Re-settable Break Glass Element
- Backward Compatibility
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the 6000/MCP indoor call point.
Installation time and ultimately cost, are of paramount importance to any fire or security installer.
The 6000/MCP range directly reflects this need by providing a simple connection concept designed specifically to reduce installation time.
The 6000/MCP utilises a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the 6000/MCP. Simple, but effective, with no re-termination required and no time wasted.
The 6000/MCP indoor call point also helps to preserve the integrity of the overall system, as illegal removal of the product lid will result in the call point operating and the system going into alarm.
Full compliance with the latest standards is essential and the 6000/MCP indoor call point is fully approved to the latest EN54 Part 11 standard.
|Environment||-10°C to +55°C|
|Humidity||0-95% non condensing|
|Weight (excluding base)||Flush – 93g, Surface – 144g|
|Operating Voltage||16 – 30V DC|
|Loop Standby Load||450μA|
|Loop Alarm Load||0.85mA|
|Dimensions (mm)||89(W) x 93(H) x 27.5(D)|
|Device Protocol||Algo-Tec™ 6000|
|Relevant Standard||EN 54-11 & 17|
AS7240 Part 11 (Export Model only)
Technical documents such as Manuals, Software downloads, BIM families, and more are available via our Client / Support Portal. To access, please Sign up or Login to your account.Sign up or login to your account