6100 Single Loop Fire Alarm Panel

Part No. 6100

Cost Effective Single Loop Panel
High Capacity Loop – 192 Addresses
Algo-Tec™ 6000PLUS Protocol
Surface and Recessed Mounting
Easy to Install
Reduced False Alarms
Enhanced Performance
On Site Flexibility
Designed to EN 54-2 & 4

Product Enquiry

Product

The Protec Algo-Tec 6100 is a single loop, digital addressable fire alarm detection and alarm system

Details
Enquiry

Product Details

Description Specification Downloads

The Protec Algo-Tec™ 6100 is an interactive digital addressable fire detection and alarm system ideally suited for small and medium sized buildings such as shops, hotels and offices. The control panel is designed and manufactured by Protec to comply with EN 54-2 & 4. The control panel is suitable for surface or recessed mounting with a moulded polycarbonate enclosure finished in storm grey.

The 6100 control panel is equipped with a high capacity Algo-Tec™ digital addressable data loop, with up to 192 addresses. In addition to the Algo-Tec™ 6000PLUS sensors, interfaces and manual call points the loop can also support loop powered SOUNDERS, VISUAL ALARM DEVICES and OPTICAL BEAM DETECTORS. Additionally a 6300 Loop Powered Repeat Display can be connected directly to this loop, resulting in reduced cabling requirements, simplified installation and associated cost savings.

Alarms

In addition to loop powered sounders and beacons, 2 fully monitored alarm outputs are provided at the panel for alternative wiring arrangements.

Auxiliary Contacts

One set of global fire, and one set of fault changeover contacts.

Controls and Display

All the functions of the modern styled Control Panel are accessed by entering the user access code. The controls are SILENCE, SOUND ALARMS, RESET and ACCEPT plus navigation push buttons to enable access to the user menu facilities. The control panel display consists of a 4×20 character liquid crystal display, twin common fire LED indicators, 16 separate zonal fire LED’s, power on, pre-alarm, system fault, common fault, test and disablement LEDs.

Liquid Crystal Display

The 80 character liquid crystal displaywill under normal quiescent conditions display the current date and time with the option to also display a 40-character user’s message such as site name.
In an alarm or fault condition the LCD will display the device, address and zone number and up to 20 characters of user definable location text, programmable on site using Protec 6100 windows based software.

Device Location Text

Windows based text software is supplied free of charge to our clients to enable you to enter the location text on to the disk supplied and hand to our commissioning engineer for loading into the panel during commissioning. This simple process allows you more flexibility enabling you to make any last minute changes and speed up the entire process.

Power Supply

The 6100 control panel is supplied with an integral 1A dc switch mode charger and accommodates two 12V 3.3 Ah sealed lead acid batteries.

On Site Programming

The Protec Algo-Tec™ 6100 system is on site programmable. All of the commissioning configuration data can be entered and/or backed up using the Protec 6100 windows based programming software via a PC. This feature enables the system to be re-configured and checked prior to attending site simplifying commissioning works on site, enabling text amendments to be carried out whilst on site and providing an invaluable remote backup should the need arise

Rated Voltage	100 to 240V ac rms
Rated Frequency	50 to 60 Hz
Rated Current	600mA rms
Working Voltage	21.5 – 29V dc
Temperature Range	0 – 40°C
Maximum Humidity	85% Non-condensing
IP Rating	IP30
Battery Type	2 x 12V 3.3Ah sealed lead acid
Standby Load (Mains Fail Condition)	22mA
Maximum Alarm Load (Mains Fail Condition)	56mA panel 600mA loop 200mA conventional alarms (100mA per alarm output) 150mA auxillary 24V output 20mA fire-link
Display	Backlit liquid crystal display 4 lines of 20 characters
Digital Addressable Loops	1 loop, with 192 address capacity Algo-Tec™ 6000PLUS Protocol
Total Loop Load	600mA including all loop connected devices
Zones	32 Zones, 16 with LED indication, plus general fire indicator
Integral Charger	1A dc switch mode, temperature compensated
Integral Battery	2 x 12V 3.3Ah sealed lead acid
Alarm Outputs	2 monitored conventional sounder circuits (100mA per output maximum)Up to 192 alarm outputs using loop output devices.
Global Fire Outputs	1 set of non-monitored changeover contacts (1A @ 24V dc) operating on any fire
Alarm Load	600mA loop, 100mA per conventional alarm output
Fault Monitoring	Fully fault monitored to EN 54-2 & 4
Fault Output	Single pole changeover contacts (1A rated @ 24V dc)
Auxiliary Output Supply	24V dc fused at 150mA
Common Fire Output (fire station)	24V dc fully monitored output (requires end of line module SF4165759)
Communications Interface	USB 2.0 (Type A male to Type B male connection lead required – 2 Metres maximum length)
Dimensions (mm)	228(W) x 345(H) x 111(D)
Weight	1.5kg (excluding batteries)
Applicable Standards	EN 54-2 : 1997 + A1 : 2006 EN 54-4 : 1998 + A1 + A2

6100 Fire Alarm Panel Datasheet

Technical documents such as Manuals, Software downloads, BIM families, and more are available via our Client / Support Portal. To access, please Sign up or Login to your account.